Lenze system bus
Lenze system bus
Direct data exchange between drive controllers for synchronisation and basic communication with sensors, actuators or operating and display units without the need for an intermediate open-loop control. These functions can be provided by the following fieldbus function modules supporting parts of the CANopen communication profile in accordance with DS301. In addition, the communication to a superimposed control system is possible.
| Type | System bus function module CAN |
System bus function module CAN |
| Order designation | E82ZAFCC | E82ZAFCC001 |
| Topology | Line with terminating resistors | Line with terminating resistors |
| Max. no. of devices | 63 | 63 |
| Max. size | Depends on the baud rate used: 1 km at 50 kBit/s; 80 m at 500 kBit/s |
Depends on the baud rate used: 1 km at 50 kBit/s; 80 m at 500 kBit/s |
| Transmission medium | Shielded twisted pair | Shielded twisted pair |
| Transmission rate | 20 - 500 kBit/s | 20 - 500 kBit/s |
| Process data size | 2 PDO channels | 2 PDO channels |
| Suitable for use with | 8200 vector, DrivePLC | 8200 vector, 8200 motec, Drive PLC, starttec |
| Special features | Terminal for activating the controller inhibit | Coated version of the E82ZAFCC module |
| Type | System bus function module CAN PT |
| Order designation | E82ZAFCC010 |
| Topology | Line with terminating resistors |
| Max. no. of devices | 63 |
| Max. size | Depends on the baud rate used: 1 km at 50 kBit/s; 80 m at 500 kBit/s |
| Transmission medium | Shielded twisted pair |
| Transmission rate | 20 - 500 kBit/s |
| Process data size | 2 PDO channels |
| Suitable for use with | 8200 vector, DrivePLC |
| Special features | As the E82ZAFCC but with plug-in terminals |
| Type | System bus function module CAN-I/O RS PT |
| Order designation | E82ZAFCC100 |
| Topology | Line with terminating resistors |
| Max. no. of devices | 63 |
| Max. size | Depends on the baud rate used: 3,93 km at 20 kBit/s; 9 m at 1 MBit/s |
| Transmission medium | Shielded twisted pair |
| Transmission rate | 20 - 1000 kBit/s |
| Process data size | 2 PDO channels |
| Suitable for use with | 8200 vector |
| Special features | Terminal for activating the controller inhibit and for the external power supply to the module and the 8200 vector control card; DIP switch for setting the address and the baud rate |
| Type | System bus function module CAN-I/O |
System bus function module CAN-I/O |
| Order designation | E82ZAFCC200 | E82ZAFCC201 |
| Topology | Line with terminating resistors | Line with terminating resistors |
| Max. no. of devices | 63 | 63 |
| Max. size | Depends on the baud rate used: 3,91 km at 20 kBit/s; 80 m at 500 kBit/s |
Depends on the baud rate used: 1 km at 50 kBit/s; 80 m at 500 kBit/s |
| Transmission medium | Shielded twisted pair | Shielded twisted pair |
| Transmission rate | 20 - 500 kBit/s | 20 - 500 kBit/s |
| Process data size | 2 PDO channels | 2 PDO channels |
| Suitable for use with | 8200 vector | 8200 vector, 8200 motec |
| Special features | Terminal for activating the controller inhibit and 2 freely configurable dig. inputs; DIP switch for setting the address and the baud rate | Coated version of the module E82ZAFCC200 |
| Type | System bus function module CAN-I/O PT |
| Order designation | E82ZAFCC210 |
| Topology | Line with terminating resistors |
| Max. no. of devices | 63 |
| Max. size | Depends on the baud rate used: 3,91 km at 20 kBit/s; 80 m at 500 kBit/s |
| Transmission medium | Shielded twisted pair |
| Transmission rate | 20 - 500 kBit/s |
| Process data size | 2 PDO channels |
| Suitable for use with | 8200 vector |
| Special features | As the E82ZAFCC200 but with plug-in terminals |